Switches and sockets are common building materials in our homes, bringing convenience to our daily use of electricity. However, there are many considerations when wiring switches and sockets, otherwise not only the lights can not light, but also cause a short circuit. So how to wire a button switch with lights? What are the precautions for switch installation? With these two questions we take a look at it!
How to wire a push button switch with lights.
First of all, the lighted button switch directly from the fire wire, connected to the terminals on the light port, zero wire and the contacts on the side of the light port, then fix the light port, install the LED lights can be used. Installation to avoid misuse, the button can be made into different colors to distinguish.
What are the considerations for switch installation.
1、Area
First of all, switch installation, depending on the region, the installation method is different, such as the kitchen and bathroom in the family is relatively humid, in the installation of the switch try to choose a switch with a waterproof cover, to avoid getting water and cause a short circuit.
2、Habit
Secondly, the installation position of the switch should be based on the family's preferences, such as the switch can be installed on the left side of the entrance, because most people are accustomed to use the right hand to open the door, so that the door to the left switch lights is very convenient. And the bedroom, it is recommended that the bed two male home to install additional dual-control switch, so that people can switch on and off the light at any time, without the need to deliberately turn back.
3、Switch spacing and height
Finally, according to the area and the number of appliances to decide the spacing and height of the switch. If the TV wall wall is wide, the number of sockets can be increased appropriately. Conversely, if the TV wall is narrower, the socket can be installed in the middle position. It is best to choose a five-hole socket. In addition, it is best to keep the switch of split air conditioner 1.8 meters from the ground, and the switch position of cabinet type public adjust is best to keep 0.3 meters distance from the ground.
