LED lamps and lanterns maintenance needs to pay attention to several points:
One, when using the lamps and lanterns try not to switch frequently, although the number of times the LED lamp is resistant to switching is about 18 times that of ordinary fluorescent lamps, but too frequently will still affect the life of the internal electronic components of the LED lamp, thus affecting the life of the lamps and lanterns.
Second, it should be especially noted that, in addition to special LED lamps and lanterns, ordinary LED lamps and lanterns should be avoided in a humid environment. The humid environment will affect the electronic components of the LED lamp drive power supply, the electronic components are damp and the life of the lamps and lanterns is shortened.
Third, moisture is the key to the maintenance of lighting, especially in the bathroom, bathroom LED lights and kitchen stove lights, are to install moisture-proof lampshades to prevent moisture invasion, to avoid rust damage or leakage short circuit.
Fourth, LED lights are better not to use water to clean, as long as the dry rag with water can be wiped, if accidentally touch the water to try to wipe dry, do not use a wet rag to wipe immediately after the light.
V. Ordinary LED lamps cannot be used in the circuits of dimmer table lamps, time delay switches and induction switches.
Six, avoid using in high temperature and high humidity environment.
Seven, LED lamps and lanterns are mainly driven by the internal power supply, it is recommended that non-professionals do not load and unload the assembly by themselves to avoid the risk of electric shock and other hazards.
Eight, LED lamps and lanterns are generally used in the ambient temperature of 5 ~ 40 ℃.
Nine, the metal part of LED lighting fixtures can not be used at will polishing powder and other chemicals.
